Sea gull lighting 8834-12 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non Sea gull lighting 8834-12. Sea Gull Lighting 8834-12 Installation Guide [en] [es] [fr] Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
INSTALLATION AND SAFETY INSTRUCTIONS
FOR YOUR SAFETY
GENERAL
ASSEMBLY
WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU
ARE WORKING ON IS SHUT OFF; EITHER THE FUSE REMOVED
OR THE CIRCUIT BREAKER SET AT OFF.
You don't need special tools to install this fixture. Be sure to follow
the steps in the order given. Under no circumstances should a
fixture be hung on house electrical wires, nor should a swag type
fixture be installed on a ceiling which contains a radiant type heating
system. Read instructions carefully. If you are unclear as to how
to proceed, consult a qualified electrician.
Carefully remove the fixture from the carton and check that all parts
are included, as shown in figure 1 and 2. Be careful not to misplace
any of the screws or parts which are needed to install this fixture.
UNIVERSAL
MOUNTING
BAR (J)
*NOT INCLUDED
FIGURE 1
FIXTURE
MOUNTING
SCREWS (I)
*WIRE
CONNECTORS
WARNING: FOR FIXTURES PROVIDED WITH 75˚ C
OR 90˚ C SUPPLY WIRE WARNING ONLY (THESE
WARNINGS ARE PROVIDED ON THE U.L. LABEL
AND ON THE FIXTURE CARTON).
WARNING: RISK OF FIRE. MOST DWELLINGS
BUILT BEFORE 1985 HAVE SUPPLY WIRE RATED
60˚ C. CONSULT A QUALIFIED ELECTRICIAN
BEFORE INSTALLING.
FIXTURE PAN (D)
FINIAL (F)
Installation And Safety
Instruction
HC-526
040301
Lineart shown may not exactly match the fixture enclosed. However, the
installation instructions do apply to this fixture.
Fill In Item Number On Carton And
File This Sheet For Fixture Reference. ITEM#_______________
GROUNDING & UNIVERSAL MOUNTING
BAR LOCK UP (FIG. 2)
*NOT SUPPLIED
*OUTLET BOX
*OUTLET BOX
SCREWS (K)
GREEN
GROUNDING
SCREW (L)
MOUNTING
SCREWS (I)
*WIRE CONNECTOR
UNIVERSAL
MOUNTING
BAR (J)
GLASS (P)
CAP
NUTS (P)
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Instruction

INSTALLATION AND SAFETY INSTRUCTIONSFOR YOUR SAFETYGENERALASSEMBLYWARNING: BE SURE THE ELECTRICITY TO THE WIRES YOUARE WORKING ON IS SHUT OFF; EITHER

Page 2

INSTALLATION HC-526FINAL ASSEMBLYSTEP 3:IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLETBOX.Make sure no bare wires can be seen outside wire connec

Commentaires sur ces manuels

Pas de commentaire