Sea gull lighting 40124-05 Guide d'installation télécharger pdf

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-1533

WIRE

CONNECTORS

FIGURE 1

*NOT INCLUDED

*OUTLET

BOX

22009

GLASS

(E)

UNIVERSAL

MOUNTING

PLATE (A)

Carefully remove the fixture from the carton and check that all parts

are included, as shown in figure 1. Be careful not to misplace any of

the screws or parts which are needed to install this fixture.

•

Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified electrician.

•

You don’t need special tools to install this fixture.

• Be sure to follow the steps in the order given.

• Under no circumstances should a fixture be hung on house

electrical wires, nor should a swag type fixture be installed on a

ceiling which contains a radiant type heating system.

• Read instructions carefully.

•

Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE YOU BEGIN

o clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

eep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place of

purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

A. Use a listed wire connector to connect the fixture hot wire (black

wire, or round and smooth tracer) to the supply hot wire.

B. Use a listed wire connector to connect the fixture common wire

(white wire, or square and rigid) to the supply common wire.

C. Gently try to remove the wires from the connector. If you can

remove the wires, carefully re-do the wiring connection.

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.

STEP 2:

INSTALLATION

RETAINING

RING (F)

CANOPY

(C)

GREEN

GROUNDING

SCREW (D)

Install universal mounting plate (A) to outlet box using outlet box

screws (not supplied). Fixture mounting screws (B) should be

perfectly horizontal so fixture hangs straight.

STEP 1:

FIXTURE

MOUNTING

SCREWS (B)

*SUPPLY

GROUND WIRE

1 2

Résumé du contenu

Page 1

Installation And Safety Instructions Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply tothis

Page 2

GROUNDING INSTRUCTIONS: The green grounding screw (D) is tobe inserted into the hole with two raised dimples provided on theuniversal mounting plate (

Commentaires sur ces manuels

Pas de commentaire

Sea gull lighting 40124-05 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non Sea gull lighting 40124-05. Sea Gull Lighting 40124-05 Installation Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Sea gull lighting 40124-05