Sea gull lighting 49031BLE-71 Guide d'installation télécharger pdf

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-764

51409

Car

efully remove the fixture from the carton and check that all parts

are included, as shown in figure 1. Be careful not to misplace any of

the screws or parts which are needed to install this fixture.

•

Be sure the electricity to the system you are working on is

urned off; either the fuse removed or the circuit breaker set

at off.

•

Use of other manufacturers components will void warranty,

isting and create a potential safety hazard.

• You don’t need special tools to install this fixture.

• Be sure to follow the steps in the order given.

• Read instructions carefully.

• Proper wiring is essential for the safe operation of this fixture.

• Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE YOU BEGIN

o clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

eep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place of

purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

Insert fixture mounting screws (B) into threaded holes of universal

mounting plate (A). Run screws all the way down to the heads.

Place universal mounting plate (A) against outlet box (not supplied)

and screw in place using #8-32 outlet box screws (not supplied). Be

sure the mounting screws (B) are perfectly vertical so fixture hangs

straight.

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX.

STEP 1:

STEP 2:

INSTALLATION

*OUTLET BOX *#8-32

OUTLET

BOX

SCREWS

FIGURE 1 *NOT INCLUDED

DIFFUSER

MOUNTING

SCREWS (B)

GREEN

GROUNDING

SCREW (E)

*SUPPL

GROUND

WIRE

CANOPY (F)

UNIVERSAL

MOUNTING

PLATE (A)

CAP NUTS (G)

*ORANGE

WIRE

CONNECTORS

SUPPORT RING (D)

RET

AINING RING (B)

1 2

Résumé du contenu

Page 1

Installation And Safety Instructions Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply tothis

Page 2 - COMBINATION

HgMARK MEANS LAMP CONTAINS MERCURY.FOLLOW DISPOSAL LAWS.SEE WWW.LAMPRECYCLE.ORGGROUNDING INSTRUCTIONS: The green grounding screw (E) is tobe inserted

Commentaires sur ces manuels

Pas de commentaire

Sea gull lighting 49031BLE-71 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non Sea gull lighting 49031BLE-71. Sea Gull Lighting 49031BLE-71 Installation Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Sea gull lighting 49031BLE-71