Sea gull lighting 41474-782 Guide d'installation télécharger pdf

Carefully remove the fixture from the carton and check that all parts

are included, as shown in figure 1 and 2. Be careful not to misplace

any of the screws or parts which are needed to install this fixture.

*OUTLET

BOX

FIGURE 1 *NOT INCLUDED

UNIVERSAL

MOUNTING

BAR (A)

FIXTURE

MOUNTING

SCREWS (B)

•

Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, contact a qualified electrician.

•

You don't need special tools to install this fixture.

• Be sure to follow the steps in the order given.

• Under no circumstances should a fixture be hung on house

electrical wires, nor should a swag type fixture be installed on a

ceiling which contains a radiant type heating system.

• Read instructions carefully.

•

Save these instructions.

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-1446

03108

IMPORTANT SAFETY INSTRUCTIONS

BEFORE YOU BEGIN

o clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

eep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place of

purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

INSTALLATION

*OUTLET

BOX

SCREWS

STEP 1

STEP 2

Run fixture mounting screws (B) through holes in universal mounting

bar (A) all the way down to their heads.

STEP 1:

Using outlet box screws (not supplied) fasten universal mounting bar

(A) to outlet box through slots in universal mounting bar (A). Be sure

fixture mounting screws (B) are perfectly horizontal so fixture hangs

straight.

STEP 2:

1 2

Résumé du contenu

Page 1

Carefully remove the fixture from the carton and check that all partsare included, as shown in figure 1 and 2. Be careful not to misplaceany of the sc

Page 2

GROUNDING INSTRUCTIONS: The green grounding screw (G) is tobe inserted into the hole with two raised dimples provided on theuniversal mounting bar (A)

Commentaires sur ces manuels

Pas de commentaire

Sea gull lighting 41474-782 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non Sea gull lighting 41474-782. Sea Gull Lighting 41474-782 Installation Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Sea gull lighting 41474-782