Sea gull lighting 94571-71 Guide d'installation télécharger pdf

INSTALLATION AND SAFETY INSTRUCTIONS

LR-120

062308

www.SeaGullLighting.com

• Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set at off.

• For use with the 120V Transitions track series by Sea Gull Lighting.

• Caution – To reduce the risk of burn during relamping remove from

the track befor

e relamping.

• If you are unclear as to how to proceed, contact a qualified

electrician.

• Minimum distance from the front of the lamp to combustible

surfaces is 8".

• Make sure all connections are tight.

• Dimming halogen lamps greatly reduces lamp life.

•

To reduce the risk of a burn during relamping, remove from the

track before relamping.

• Turn off and allow to cool before replacing lamp.

• Lamp gets HOT quickly! Contact switch only when turning on.

• Do not touch hot lens, guard, or enclosure.

• Keep lamp away from materials that may burn.

•

Do not touch the lamp at any time. Use a soft cloth. Oil from skin

may damage lamp.

• Do not operate the luminaire fitting with a missing or damaged

shield.

• Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

*OUTLET

FIGURE 1

RAIL

ADAPTER (R)

CANOPY

(G)

SPLICE

COMPARTMENT

(I)

COLLAR (J)

SOCKET (Q)

STEM (M)

*NOT INCLUDED

AP (E)

LAMP

ENCLOSURE

(B)

NOTE: This pendant can be hung either from a Transitions Series

rail (not supplied) or from the supplied canopy. Follow the

instructions for the appropriate mounting method.

TRAIN

RELIEF

SCREW (P)

GROUNDING AND MOUNTING BAR

LOCK UP FOR OPTIONAL

MONO-POINT CANOPY

COLLAR (O)

MOUNTING

BAR

(F)

WIRE

CONNECTORS

*GROUND WIRE

*OUTLET BOX

FIGURE 2 *NOT INCLUDED

HEX NUT & LOCK

WASHER (D)

*OUTLET BOX

SCREWS

STRAIN RELIEF (H)

MONO-

POINT

CANOPY

(G)

NIPPLE

(A)

1 2

Résumé du contenu

Page 1 - MONO-POINT CANOPY

INSTALLATION AND SAFETY INSTRUCTIONSLR-120062308www.SeaGullLighting.com• Be sure the electricity to the system you are working on is turnedoff; either

Page 2 - INCORRECT

ASSEMBLING PENDANT/SHORTENING PENDANT LR-1201. Determine length of pendant and shorten cable from thesplice compartment (I). Be sure to add 5"

Commentaires sur ces manuels

Pas de commentaire

Sea gull lighting 94571-71 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non Sea gull lighting 94571-71. Sea Gull Lighting 94571-71 Installation Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Sea gull lighting 94571-71