Sea gull lighting 8588-12 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non Sea gull lighting 8588-12. Sea Gull Lighting 8588-12 Installation Guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Installation And Safety Instructions
Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to
this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________
HC-269
C
arefully remove the fixture from the carton and check that all parts
are included, as shown in Figure 1. Be careful not to misplace any of
the screws or parts which are needed to install this fixture.
FIGURE 1
*NOT INCLUDED
Be sure the electricity to the system you are working on is turned
off; either the fuse removed or the circuit breaker set at off.
Use of other manufacturers components will void warranty, listing
and create a potential safety hazard.
If you are unclear as to how to proceed, contact a qualified
electrician.
You don’t need special tools to install this fixture.
Be sure to follow the steps in the order given.
Read instructions carefully.
Save these instructions.
IMPORTANT SAFETY INSTRUCTIONS
BEFORE YOU BEGIN
CAUTION: Fixtures with photocells should be mounted at least
48" from all sides to avoid reflection of light back onto photocell,
causing the photocell to malfunction or flicker.
IF SUPPLY WIRES ARE LOCATED
WITHIN 3" OF BALLAST, USE WIRE
RATED FOR AT LEAST 90°C.
CANOPY (I)
ROOF (L)
0
70208
CAP NUT (H)
NOTE: This glass is handcrafted, the slight imperfections in the glass
add to the authenticity of the fixture.
GREEN
GROUNDING
SCREW (G)
NIPPLE (F)*WIRE
CONNECTORS
*OUTLET
BOX
SCREWS
NUT (E)
SOCKET (M)
MOUNTING
BAR (D)
Vue de la page 0
1 2

Résumé du contenu

Page 1 - RATED FOR AT LEAST 90°C

Installation And Safety Instructions Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply tothis

Page 2

IMPORTANT: DO NOT ATTACH FIXTURE DIRECTLY TO OUTLETBOX.Using outlet box screws (not supplied) fasten mounting bar (D) tooutlet box through slots in mo

Commentaires sur ces manuels

Pas de commentaire