Sea gull lighting 41035-962 Guide d'installation télécharger pdf

UNIVERSAL

MOUNTING

PLATE (J)

CAP NUTS (N)

BACK PLATE (M)

(FIG.

GROUNDING & UNIVERSAL

MOUNTING BAR LOCK UP (FIG. 2)

*NOT SUPPLIED

*OUTLET BOX

SCREWS

MOUNTING SCREWS (I)

*WIRE CONNECTOR

GREEN

GROUNDING

SCREW (L)

UNIVERSAL

MOUNTING

PLATE (J)

GLASS

RETAINING

RING (C)

GLASS (B)

Installation And Safety Instructions

Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to

this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________

HC-371

50698

•

Be sure the electricity to the system you are working on is turned

off; either the fuse removed or the circuit breaker set

at off.

• Use of other manufacturers components will void warranty, listing

and create a potential safety hazard.

• If you are unclear as to how to proceed, consult a qualified

electrician.

• Under no circumstances should a fixture be hung on house

electrical wires, nor should a swag type fixture be installed on a

ceiling which contains a radiant type heating system.

• You don’t need special tools to install this fixture.

• Be sure to follow the steps in the order given.

• Read instructions carefully.

• Proper wiring is essential for the safe operation of this fixture.

• Save these instructions.

IMPORTANT SAFETY INSTRUCTIONS

o clean, wipe fixture with a soft cloth. Clean glass with a mild soap.

Do not use abrasive materials such as scouring pads or powders,

steel wool or abrasive paper.

eep this sheet for future reference, and in case you need to order

replacement parts. Parts for this fixture can be ordered from place of

purchase. Be sure to use exact wording from illustration when

ordering parts.

CLEANING

ORDERING PARTS

Car

efully remove the fixture from the carton and check that all parts

are included, as shown in figure 1. Be careful not to misplace any of

the screws or parts which are needed to install this fixture.

BEFORE YOU BEGIN

(FIG.

*NOT SUPPLIED

1 2

GROUNDING & UNIVERSAL 1

Résumé du contenu

Page 1 - GROUNDING & UNIVERSAL

UNIVERSALMOUNTINGPLATE (J) CAP NUTS (N)BACK PLATE (M)(FIG.2)GROUNDING & UNIVERSALMOUNTING BAR LOCK UP (FIG. 2) *NOT SUPPLIED*OUTLET BOX*OUTLET BOX

Page 2

GROUNDING INSTRUCTIONS: The green grounding screw (L) is tobe inserted into the hole with two raised dimples provided on the universal mounting bar (J

Commentaires sur ces manuels

Pas de commentaire

Sea gull lighting 41035-962 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non Sea gull lighting 41035-962. Sea Gull Lighting 41035-962 Installation Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Sea gull lighting 41035-962